Alle Preise verstehen sich Netto zuzüglich der gesetzlichen MwSt. Mindestbestellewert 150€. Versandkosten nach Gewicht. Preis freibleibend.

PPO-pumps

VISCOMAT 230 V/50 Hz

VISCOMAT gear pumps have been designed as modern, effective solutions for the various requirements of pumping oils and lubricants. Thanks to the several available models VISCOMAT satisfies the need to:

• transfer quantities of product at medium pressure between tanks;
• guarantee good flow rates at high pressure in applications in which the pump must supply the reeling drums of fixed, "in-line" oil distribution systems on fixed pumping systems;
• Common features of all models are:
• quiet operation,
• regularity of flow characterized by the absence of pulsations,
• closed-delivery operation option thanks to the incorporated adjustable BYPASS,
• high suction capacity,
• compact design.

Typ	Engine	Performance	Pressure	Price
200/2M	750 Watt	12l/ min	10 Bar	190 €
350/2M	1.200 Watt	10l/ min	25 Bar	240 €

Performance Characteristics

• Flow rates from 9 to 14 l/min (2,4 to 3,7 gal/min).
• Pressures from 12 to 25 bar (170 to 355 psi).
• Continuous operation.
• Noise less than 70 dB.
• Viscosity up to 2000 cSt

PDF-Download: viscomat.gear

Vane-pump VISCOMAT

VISCOMAT is a family of internal profile vane pumps designed as modern, effective solutions for the various requirements of pumping oils and lubricants. Thanks to the available models VISCOMAT satisfies the need to

• transfer large quantities of product at medium pressure between tanks;
• guarantee good flow rates at high pressure in applications in which the pump must supply the reeling drums of fixed, "in-line" oil distribution systems on fixed pumping systems;
• The main features are:
• quiet operation,
• regularity of flow characterized by the absence of pulsations,
• closed-delivery operation option thanks to the incorporated adjustable BYPASS,
• high suction capacity,
• compact design.

Performance Characteristics

• Flow rates from 25 to 50 l/min (6,1 to 13,2 gal/min).
• Pressures from up to 6 bar (71 psi).
• Continuous operation.
• Noise less than 70 dB.
• Viscosity up to 500 cSt

Crimped hoses

	4m	6m	Meter goods	Sleeve
3/4"	30 €	45 €	7,5 €	2,5 €
1"	45 €	70 €	12 €	3 €

Line filters

Regenerable wire mesh line-filter (for suction or delivery)

 Stainless steel.  1“ thread.

Price: 20 €

NOZZLES

MANUAL VERSION Flow rate max 150 l/min

Price: 17 €

Meters 

Mechanical Meters

K33

K33 and K44 are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters are reliable, inexpensive, easy to install and simple to calibrate on the workplace

• Flow-rate (range): 20÷120 l/min (5,3÷32 gal/min).
• Precision: ±1% of flow range after calibration.
• Repeatability: 0,2%.
• Max. operating pressure: 10 bar (142 psi).
• Bursting pressure: 30 bar (426 psi).
• Readout system:
• K33, 3-digit subtotals (max 999 litres), 6-digit totals.
• K44, 4-digit subtotals (max 9999 litres), 7-digit totals.
• Resolution: 0.1 litre.

Price: 110 €

K44

Price: 125 €

PDF-Download: k33

Electronical meters

K400/K600

The electronic oval gear meters for product delivery control and measurement are used in the private distribution of low, medium and high viscosity fluids such as fuel, lubrication oil and other special fluids compatible with the construction materials. The oval gear measuring principle adopted offers high precision and low pressure losses together with a compact lightweight design and easy installation.

An electronic card with microprocessor permits control of the display and calibration of the meter. A complete range of models is designed to satisfy all flow rate requirements. Ease of use, compactness and the independent battery power supply make these products suitable for installation in both stationary systems on fluid transfer and distribution lines and in mobile applications as an accessory for delivery valves and guns and for all other industrial applications that require fluid delivery control.

• Precision ± 0.5 % in flow rate range after calibration
• Repeatibility 0.2%
• Pressure loss < 0.5 bars (7 psi) at max flow rate

	Durchfluss	Preis
K 400	bis 30 l/min	150 €
K600/3	bis 100 l/min	280 €

PDF-Download: k400-k600

Much more parts as an exceltable to download.